Taboo GT - Ballast Installation

Taboo GT - Ballast Installation


	Behind the 3 slugs you need to install a light balsa plug. Push the plug into the tailboom to the required depth using a piece of wire to measure the depth. Drop a few drops of thin CA onto the walls of the tailboom from inside to glue the plug to the tailboom. Then take a wooden dowel about 1/2" (12mm) diameter and make 2 blanks to use instead of slugs when you need only 1 slug. From the same dowel make the front plug that will go between the tailboom and the main bulkhead.